mitsubishi

!Galant
[./images/mitsubishi-galant-vr-4rs-sixth-generation.jpg|caption=]

!Mitsubishi ASX (Outlander Sport, RVR)
Same vehicle as Peugeot 4008 and Citroen C4 Aircross.
[Selectable All Wheel Drive|sele]

Shares the [GS platform|http://en.wikipedia.org/wiki/Mitsubishi_GS_platform], co-developed by Mitsubishi and DaimlerChrysler. The GS platform is also used on
*Mitsubishi 
**Lancer
**Lancer Evolution X
**Outlander XL (Peugeot 4007, Citroen C-Crosser)
*Dodge 
**Caliper
**Avenger,
**Journey (Fiat Freemont)
*Jeep 
**Compass
**Patriot
*Chrysler 
**Sebring
**200

[./images/mitsubishi-asx.jpg|caption=Mitsubishi ASX transmission]
[./images/mitsubishi-asx_x.jpg|caption=Mitsubishi ASX transmission]

!!Mitsubishi Online Newsroom: All New 2011 Mitsubishi Outlander Sport Offers A Composed Ride, Along With Surprising Agility
'''Available On-Demand Electronically-Controlled 4WD System'''
A sophisticated electronically-controlled 4WD system is also available for the SE version of the Outlander Sport that greatly enhances both on-and off-road traction in good or bad weather conditions.
Unlike Mitsubishi's remarkable Super All-Wheel Control (S-AWC) 4WD system found in the company's famed Lancer Evolution model that utilizes such exotic technology as active differentials and active yaw control for extreme high performance, the on-demand electronically-controlled 4WD found on the new Outlander Sport emphasizes fuel efficiency while giving the driver the option to switch to traction-enhancing all-wheel drive at their discretion.
Borrowed from the larger outlander SUV, the 4WD system consists of a rear differential carrier, and electronically controlled coupling (ECC) connected to the forward section of the rear differential and a power transfer unit (PTU) mated to the transmission near the front axle. These components have been designed to be exceptionally lightweight yet sturdy for the rugged terrain and conditions that the vehicle may encounter. And thanks to a low viscosity oil used in the power transfer unit (PTU), this helps to improve fuel economy by 0.1 percent compared to the Outlander.
A major design upgrade over the Outlander's 4WD system has been a recalibration of the systems control unit that has led to a variety of improvements including enhanced fuel economy, stability in 4WD mode, improved traction and steering feel when accelerating from a standstill, and an overall reduction in noise, vibration and harshness (NVH).
The system has three shift-on-the-flying settings:
*'''2WD''' Setting most likely to be used for normal everyday driving; allows the Outlander Sport to operate as a front-wheel drive vehicle.

*'''4WD''' Delivers power to all four wheels for improved traction and safety in slippery driving conditions

*'''LOCK''' Like the 4WD setting, it routes power to all four wheels but it distributes 60 percent of the available power to the rear wheels for sportier handling.
[(c)2013 Mitsubishi Motors North America, Inc. |http://media.mitsubishicars.com/releases/949210b1-16f6-1e7a-d6f5-613b4cab8321]
!Lancer Evolution VII
[./images/mitsubishi-lancer-evo-VII.jpg|caption=]
[./images/mitsubishi-lancer-evo-VII_x.jpg|caption=]
[./images/mitsubishi-lancer-evo-VII_xx.jpg|caption=]
[./images/mitsubishi-evo-s-awc.jpg|caption=]

!Outlander I
[full-time all wheel drive|full]
[./images/mitsubishi-outlander-I-rear-differential.gif|caption=Mitsubishi Outlander I rear differential]
[./images/mitsubishi-outlander-I-transfer-case.gif|caption=Mitsubishi Outlander I transfer case]
The four-wheel drive version uses open differentials for the front and rear axles, with a viscous coupling unit for the center differential.

!Outlander II
Same vehicle as Peugeot 4007 and Citroen C-Crosser.
[automatic all wheel drive|auto]
The driver can use a drive-mode dial on the center console to select “FWD” for best fuel economy.

With “4WD Auto” mode selected, the system uses a rear-mounted electronically controlled transfer clutch to automatically and seamlessly route more power to the rear wheels, depending on driving and road surface conditions. The driver can freely change the drive mode at any time. When “4WD Auto” mode is selected, the Outlander's 4WD system always sends some power to the rear wheels, automatically increasing the amount under full throttle acceleration. The coupling transfers up to forty percent of available torque to the rear wheels under full-throttle acceleration, and this is reduced to twenty five percent over 40 miles per hour. At steady cruising speeds, up to fifteen percent of available torque is sent to the rear wheels. At low speeds through tight corners, coupling torque is reduced, providing a smoother feel through the corner.

For driving in particularly challenging conditions, such as snow, the driver can select “4WD Lock” mode. In Lock mode, the system still apportions front and rear torque automatically, but enables greater power transfer to the rear wheels. In dry conditions, 4WD Lock mode places priority on performance. More torque is directed to the rear wheels than in 4WD Auto mode to provide greater power off the line, better control when accelerating on snowy or loose surfaces, and enhanced stability at high speeds. Rear wheel torque transfer is increased by 50 percent over the amounts in 4WD Auto mode – meaning up to 50 percent of available torque is sent to the rear wheels under full-throttle acceleration on dry pavement. When in 4WD Lock mode, torque at the rear wheels is reduced by a smaller degree through corners than with 4WD Auto mode.
Source: [Wikipedia|https://en.wikipedia.org/wiki/Mitsubishi_AWC]

[./images/mitsubishi-outlander-II-rear-differential-and-coupling-unit.gif|caption=Mitsubishi Outlander II rear differential and coupling unit]
[./images/mitsubishi-outlander-II-transfer-case.gif|caption=Mitsubishi Outlander II transfer case]


!Outlander III (2012-...)
?

!L200 (2004?)
Easy Select [part-time all wheel drive|part]. Front axle vacuum disconnect system. When in 2H mode, the right front driveshaft is disconnected from the front differential. The left and right front driveshafts are rotating freely in 2H mode.
[./images/mitsubishi-l200.jpg|caption=Mitsubishi L200 all wheel drive system. Vacuum front axle disconnect system (1 - disconnected, 2 - connected)]
[./images/mitsubishi-l200_xx.jpg|caption=Mitsubishi axle disconnect system]
[./images/mitsubishi-l200_x.jpg|caption=Rear differential lock]
[./images/mitsubishi-l200-front-differential.gif|caption=Mitsubishi L200 front differential]
[./images/mitsubishi-l200-rear-differential-LSD.gif|caption=Mitsubishi L200 rear limited-slip differential]
[./images/mitsubishi-l200-rear-differential-standard.gif|caption=Mitsubishi L200 rear free differential]
[./images/mitsubishi-l200-transfer-case.gif|caption=Mitsubishi L200 transfer case]

!Pajero, Montero, Shogun 1982-1991, L200 (... - 2006)
Part-time transmission. No center differential. Low gear. Some were equipped with limited slip differential in the rear.


!Pajero II, Montero, Shogun 1991-2000,
can have [part-time all wheel drive|part] (GL) or [Super Select|super select] [selectable all wheel drive|sele] system (GLX, GLS). Super Select works as a [full-time all wheel drive|full] when in 4H mode.
In case of a part-time transmission can have automatic hubs or a vacuum axle disconnect system. [Super Select|super select] has a vacuum axle disconnect system.
Rear mechanical differential lock standard on GLS (100% lock, button activated).

!Pajero Pinin (1991-)
[Super Select|super select] [selectable all wheel drive|sele] system.

!Pajero III, Pajero IVIV, Pajero Sport II 92008 - 2016), Mitsubishi L200 (2005 - ...)
[Super Select|super select] [selectable all wheel drive|sele] system.